Skip to main content

Step 1

Place the first tool in the notch in the center of the bumper, just above the cover. It’s a tight fit for maximum strength.

Step 2

Pry the cover open enough to place the second tool in the gap, but don’t force it.

Pro Tip: The trick is to find the clips and release them, not use excessive force that damages the clips.

Step 3

Reposition the first tool to continue working to release the clips around the cover. Alternate repositioning the tools as needed to release the clips.

Step 4

Once the clips are loose, pull the top corners to remove the cover.

This field is for validation purposes and should be left unchanged.