SnapPlate (2020-2023 Volkwagen ID.4) Preorder

From: $110.00

We’re looking for any Volkswagen ID.4 owners who live near the California Central Coast to help out with product development. Reach out if that’s you!

SnapPlate removable front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the front end when it’s installed and it leaves no unsightly hardware behind when it’s removed.

SnapPlates are designed, printed, and assembled in California by electric vehicle owners and fans. We strive to reduce our environmental impact by using recycled plastics that are Made in the USA and by using Prusa 3D printers to make strong parts with internal structures that optimize our use of plastics.

This SnapPlate fits the 2020-2023 Volkswagen ID.4 only. It comes with a plate mount designed for a standard US license plate (12″ x 6″) with holes at 7″ x 4.75″ (178mm x 121mm). It also fits plates in Canada or Mexico with the same hole dimensions.

Looking for a plate mount for a different country? If we don’t have it in our Custom SnapPlates, we can make it.

Looking for a different vehicle? We have the whole lineup, SnapPlate parts, and more in our shop.

Plate Mount Side Trim

Curved side trim pieces slide in between the plate and the mount and add a nice look from the side.

Four Extra Black Stainless Steel Security Screws

Additional torx security screws (M5-0.8x10mm). We also have 16mm and 20mm for thicker license plate frames.

Four Extra Silver Stainless Steel Security Screws

Additional torx security screws (M5-0.8x10mm).

Out of stock

Description

SnapPlate removable front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the front end when it’s installed and it leaves no unsightly hardware behind when it’s removed.

The idea for SnapPlate was born when I got a ticket for not having a front license plate the same weekend I bought a new 3D printer. As a self-proclaimed front-license-plate hater, I wanted something that was easy to install when traveling to areas that enforce front license plate use and easy to remove the rest of the time. None of the options available had every feature I wanted, so I made one…and then all my friends wanted one too.

SnapPlate attaches and removes in seconds and is:

  • Paint-safe
  • Grille-safe
  • Radiator-safe

Hanging a license plate off the front of the plastic grille is actually pretty dangerous for the grille and grille replacements are expensive. To make SnapPlate grille-safe, we designed it to break away if it is stressed by car washes, fender benders, vandals, etc. We know things happen, so we sell replacement parts for less than it costs us to make and ship them.

Each SnapPlate comes with:

  • One fully-assembled front license plate mount, ready for your license plate
  • Four black and four silver torx security screws for the plate
  • One black torx security screw to optionally secure it to the car
  • One torx security screwdriver to keep in the car
  • One zippered case to keep all the accessories tidy in your car

SnapPlate is perfect to:

  • Remove your plate for car shows
  • Install to avoid tickets while parked at a meter
  • Remove to clean your car at home or at a car wash
  • Install for toll-by-plate roads and bridges
  • Deter theft with torx security screws on the plate and mount
  • Install a temporary plate to support your favorite team on game day

Easy Installation and Removal in Seconds:

To install SnapPlate:

  1. Push the actuator on the right side of the SnapPlate to rotate the latches open
  2. Line it up with the center of the grille
  3. Plug it in
  4. Push the actuator on the left side of the SnapPlate to rotate the latches closed (internal magnets keep it closed)
  5. Done
  6. Optionally, if you want additional security, use the included screwdriver to install the black security screw into the hole on the right side

To remove SnapPlate:

  1. Loosen the security screw, if you’re using it
  2. Push the actuator on the right side of the SnapPlate to rotate the latches open
  3. Unplug
  4. Nothing left behind

Video

Features

Paint-Safe*:

Once installed, SnapPlate sits away from the paint and is strong enough to resist wind and weather without touching the bumper. Take care during installation to not touch the painted parts of the car.

Grille-Safe*:

SnapPlate has three latches that fit perfectly through and behind the grille openings to install, but then rotate to hold. They hold it firmly in place without stressing the plastic grille. It’s also flexible enough to not break the grille if it is accidentally pushed into the bumper.

Radiator-Safe*:

The rotating latches are positioned behind the grille and in front of the radiator and active louvers.

*SnapPlate won’t damage paint, block airflow to the radiator, or damage the grille when installed correctly and used under normal circumstances. In the event of an accident this product is not intended to provide protection to prevent vehicle damage and we are not liable for any damages to any vehicles, people, or any objects caused as a result of the use of this product.

Unapologetically Printed

3D printing enables us to create a very strong product with an internal structure that is 90% air. That makes it strong while using less plastic than other processes.

Injection molding is great for making millions of simple things, but it’s very expensive for small quantities of complicated things like this. If not for 3D printing, SnapPlate probably wouldn’t exist or it would cost much more.

One consideration of 3D printing is that the surface finish is different from injection molded parts. Since it makes the parts one layer at a time, it has some distinct features. Here some examples:

Layers – parts are printed one layer at a time

Steps – the layers are visible as steps on slanted surfaces

Strings – fine, easily-removable strings are sometimes left behind

Small Holes – where the printer changes layers

FAQ

Q: What is your return policy?

A: If you’re not satisfied, you have 30 days to return SnapPlate for a full refund. See our returns and refunds policy for details.

 

Q: What is the warranty?

A: We’ll give you 180 days to make sure it can hold up to your local weather. See our returns and refunds policy for details.

 

Q: Can I use a license plate holder or frame with SnapPlate?

A: If the frame is 1/4″ (6mm) or less then the included 10mm screws will work fine. If you need longer, they’re available in our shop.

 

Q: Can I get SnapPlate in a color other than black?

A: Maybe. Email us at contact@everyamp.com.

 

Q: Can I get a custom logo?

A: Maybe. Email us at contact@everyamp.com.

 

Q: If SnapPlate is so easy to remove, won’t it be easy to steal?

A: If someone knows enough to steal it, they should know that they’ll be staring at the front Sentry camera while they’re doing it, but if theft is a concern for you, just screw the included security screw into the hole in the side of SnapPlate to make it much harder to remove.

 

Q: Do you sell spare parts? For how much?

A: Right here.

 

Q: Can I get the files to print my own parts?

A: Not at this time, but we plan to open source it in the future when making them ourselves is no longer fun.

 

Q: What is SnapPlate made of?

A: PETG plastic (the same stuff as water bottles) and stainless steel fasteners.

 

Q: Can I take SnapPlate through an automated car wash?

A: Some touchless washes may be fine, but brushes or really strong touchless water sprays will likely push it into the bumper which could scratch the paint or (hopefully to avoid damaging the bumper or grille) break the plate mount off. In either case, we strongly recommend you remove it. SnapPlate is fast and easy to remove for situations exactly like this.

 

Q: Is SnapPlate weather-proof?

A: It is made of plastic with stainless stainless steel fasteners so there’s no concern of rust and the body has integrated drain paths for any water that might enter.

 

Q: Will SnapPlate fade in the sun?

A: PETG plastic is UV stable, but when it is mounted on the car, there is very little direct sun on it anyway.

 

Q: Will wind push the plate against the bumper? What about speed bumps?

A: We tested SnapPlate at over 80 mph and over sharp speed bumps at 20 mph with no issues. Check out our deflection testing video: