Instruction Guide - Rivian R1T & R1S Seat Back Anchors
This page provides a clear instruction guide for installing seat back anchors in Rivian R1T and R1S vehicles. Follow the step-by-step directions to ensure proper and secure installation.
Installation
-
![]()
Step 1
Loosen the screw to expand the anchor.
-
![]()
Step 2
Slide the anchor over either hook on the back of the seat.
-
![]()
Step 3
Tighten the screw to clamp the anchor onto the hook and secure it in place.
-
![]()
Step 4
Install your favorite mounts, arms, or other accessories as directed by their instructions.
For the 17mm mount pictured, loosen the collar, press it onto the ball mount, and tighten the collar while holding the mount in the desired direction. -
![]()
Step 5 (Optional)
Note: EveryAmp magnet mounts include an adhesive metal ring that can be installed on a device or case that is not compatible with MagSafe mounts.
Important! Do not use the metal ring between a mount and MagSafe device or it will significantly reduce the strength of the magnets.
