Follow the steps below to install and adjust a tow hook front license plate mount on a 2027 Rivian R2. We're here to help if you have questions or get stuck!
Rivian R2 Tow Hook Mount Instruction Guide
Installation Steps ➥
-
![SnapPlate T10/T25 Screwdriver]()
Step 1
Insert the T10/T25 bit in the screwdriver handle with the larger T25 bit facing out.
Note: If it's already installed with the T10 bit facing out, grab the bit and pull it out of the handle to flip it around. -
![Rear view of a green SUV with a license plate reading EVERYAMP, showing two images with text Fits on Either Tow Hook between them, illustrating tow hook compatibility.]()
Step 2
The tow hook mount can be installed on either side, so pick the side that you like best.
-
![A hand holding a damaged black plastic part with a scratched surface, indicated by an orange arrow, near a metallic car handle.]()
Step 3
Position the block with the R2 logo facing up inside your tow hook of choice.
-
![A hand holds a black bracket near a car’s rear bumper; an orange arrow points to a mark or scratch above the license plate area.]()
Step 4
Position the plate mount with the EVERYAMP logo facing up over the block.
-
![A hand uses a screwdriver to install or remove a screw from a black license plate frame attached to the front of a vehicle. Orange arrows indicate the screws direction.]()
Step 5
Insert both of the longer (30mm) screws through the plate mount and block and tighten each just enough to engage with the nuts in the block.
Important! Don't fully tighten one screw before starting the second or the block may get crooked and the second screw may not line up with the nut.
If that happens, loosen the first screw, get the block straight, and then try the second screw again. -
![A hand uses a screwdriver to install or remove a screw from a black license plate frame attached to the front of a vehicle. Orange arrows indicate the screws direction.]()
Step 6
Tighten both screws evenly by alternating each screw a few turns at a time until they are both tight.
-
![A hand uses an orange screwdriver to attach a California license plate labeled EVERTAMP to the back of a black vehicle.]()
Step 7
Install the license plate using four of the black or silver washer head (10mm) screws.
Loading...
EveryAmp
| SKU:
THR22027US
$75.00
Why it costs less here
When you buy direct from the manufacturer, we pay lower fees and pass those savings on to you.
Low price guarantee
If you find a lower price, show us and we'll match it.
Unit price
/
Coming Soon
Shipping calculated at checkout.
Tow Hook Front License Plate Mount for Rivian R2 - 2027 is backordered and will ship as soon as it is back in stock.
