No-Drill Front Bumper 1/4"-20 Accessory Mount for Rivian R1T & R1S

Easy Installation and Removal in Seconds:

To install:

1. Loosen the security screw until the toggle nut reaches the end of the stopper
2. Orient the toggle nut so that fits through the grille opening
3. Insert the assembly into the grille
4. Begin tightening the security screw while ensuring that the toggle nut turns vertical
5. Carefully tighten the screw until the mount is stable
6. Do not overtighten!
7. Attach accessory using the 1/4″-20 thumb screw
   
   

To remove:

1. Loosen the security screw until the toggle nut turns horizontal
2. Remove the mount