🚚 Free Shipping for US Orders Over $75

Chevy Blazer EV SnapPlate Front License Plate Bracket

$95.00 $110.00
Year Range
Trim Package

The Best (and Fastest) Front License Plate Mount. Period.

Clean & minimal aesthetic, safety-first repairable design, and 3D-printed Made-in-USA recycled plastic for reduced environmental impact and better grille safety.

Secure, Lockable Design

Clean & Minimal Aesthetic

Blends perfectly with the Blazer EV front end.

3D Printed in the USA

3D printed from Made-in-USA recycled PETG plastic.

Fits US, Canada & Mexico License Plates

Fits LT and RS trims only.

Key Features
  • Clean, minimal design blends perfectly with the Blazer EV front end
  • Mount installs and completely removes in seconds
  • Breakaway features reduce risk of grille damage from vehicle accidents and car washes (remove for touch washes!)
  • 3D printed from Made-in-USA recycled PETG plastic
Compatibility
  • Chevrolet Blazer EV (2024-2025)
  • Fits RS and LT trims only.
  • US, Canada, and Mexico license plates
Includes
  • Five black and four silver T25 torx security screws, T10/T25 screwdriver, and felt case
  • Security screw and driver to prevent removal and deter theft
Installation

Frequently Asked Questions

Why would you want to remove a license plate?

Some customers live in areas where it's not always enforced and they prefer the look without, but many customers simply want to permanently mount their license plate without having to use screws or adhesives.

Are SnapPlates car wash safe?

Touchless car washes are generally ok, but a touch wash will grab and pull until something breaks and we don't want that to be the plastic grille on your vehicle.

If touch washes are your priority and you don't want to remove the SnapPlate for it, the license plate mount that came with your vehicle is the best option for you.

If SnapPlate is easy to remove, isn't it easy to steal?

Most license plates are easy to steal when they're installed with simple screws that are easy and quick to remove with power tools.

SnapPlates come with anti-theft security screws to attach the license plate to the SnapPlate and, optionally, to secure the SnapPlate to the vehicle. It can be quick and easy to remove, but only if you want it to be.

Why are SnapPlates made from plastic instead of metal?

SnapPlates attach to the plastic bumper or grille on vehicles. In a worst-case scenario where something pushes or pulls hard enough on the license plate to break something, we'd rather it be the SnapPlate than your vehicle since it's far less expensive and inconvenient to repair.

You can read more about why we choose plastic over metal in our blog post here.

Where can I find replacement parts?

You can find replacement parts for everything here.

If you need help picking out parts, reach out with a photo of what you need!

A white electric SUV is parked on a rural roadside, with rolling hills and a clear blue sky in the background.

SnapPlate

Clean & minimal aesthetic, safety-first repairable design, and 3D-printed Made-in-USA recycled plastic for reduced environmental impact and better grille safety.

The best (and fastest) front license plate mount. Period.

Close-up of a Chevrolet vehicles front end with a California license plate reading SNAPPLATE in purple on white. The vehicle is parked outdoors.

Clean, Minimal Aesthetic

SnapPlate+ blends seamlessly with the front end of your vehicle and leaves nothing behind when removed.

  • No screws, drills, or adhesive
  • Installs & removes in seconds
  • Includes optional anti-theft security screw
White SUV with a California license plate labeled SNAPPLATE in focus. Inset shows a close-up of the SnapPlate mounting system on the front bumper. Hills are visible in the background.

Safety-First,
Repairable Design

Patented breakaway features designed to not damage vehicle in parking accidents and touch car washes.

  • Rotating latches with multiple contact points distribute stress on the grille
  • Low-cost replacement parts available for everything
A metal mounting bracket with a textured finish is displayed next to a Made in USA label and a recycling symbol on a geometric background.

Proudly Plastic
& Stainless Steel

SnapPlates are 3D Printed with Made in USA Recycled PETG Plastic with Strategically-Placed Stainless Steel Fasteners.

  • Better grille safety compared to metal
  • Minimal waste compared to CNC routing
  • Less plastic use compared to injection molding
Close-up of a white vehicles rear parking sensor against a blurred outdoor background.

How SnapPlate Works

Say goodbye to screws and adhesives – SnapPlates are designed for quick and easy installation, with no tools required.

  • No screws or adhesives
  • Installs and removes in seconds
  • Blends with the front end when installed
  • Leaves nothing behind when removed
  • Includes optional anti-theft security screw
Instruction Guide

Customer Reviews

Based on 3 reviews
67%
(2)
33%
(1)
0%
(0)
0%
(0)
0%
(0)
D
David Stasney
Great!

Everything I needed it to be!

E
Ed Jenks
Nice Bracket

Easy to install, no hole in the body work. It's on tight and looks good.

L
Lance

Got it put on with minimal effort. I was able to take it off just as easily before the car wash. It is definitely 3D printed, but it is great to see a company use ingenuity to build something that works on every level!! Keep it up and make some more designer one's !!!!

  • A blank white image with no visible content.

    Innovative Accessories

    Designed to solve everyday problems

  • A plain white background with no visible objects or text.

    Sustainably Sourced

    Made from recycled plastics

  • Empty white square with no visible features or details.

    Responsibly Made

    Designed, 3D printed, and assembled in California

Save on Purchases or Earn Commissions with EveryAmp

Find coupons or sign up as an affiliate

Opportunities to Save and Earn
Back to top