High Quality EV Accessories Made in California

Tesla Model 3 SnapPlate Front License Plate Holder

(46)
$130.00
Year Range
SnapPlate Version

The Best (and Fastest) Front License Plate Mount. Period.

Clean & minimal aesthetic, safety-first repairable design, and 3D-printed Made-in-USA recycled plastic for reduced environmental impact and better grille safety.

Secure, Lockable Design

Clean & Minimal Aesthetic

Blends perfectly with the Tesla Model 3 front end.

3D Printed in the USA

3D printed from Made-in-USA recycled PETG plastic.

Fits US, Canada & Mexico License Plates

Fits Tesla Model 3 (all years and trims available).

Key Features
  • Clean, minimal design blends perfectly with the Tesla Model 3 front end
  • Mount installs and completely removes in seconds (remove for touch car washes!)
  • Height-adjustable plate mount with high, center, and low positions
  • 3D printed from Made-in-USA recycled PETG plastic
Compatibility
  • Tesla Model 3 (fits all trims, including Performance, choose your year)
  • US, Canada, and Mexico license plates
Includes
  • Five black and four silver T25 torx security screws, screwdriver, and felt case
  • Security screw and driver to prevent removal and deter theft
Installation

SnapPlate VS SnapPlate+

SnapPlate SnapPlate+
Designed for grille safety Designed for maximum strength
Breakaway rotating latches for grille safety Stainless steel reinforced latches for maximum strength
Low-profile, breakaway plate mount High-strength plate mount
Lightweight base Stainless-steel reinforced base
Remove for all car washes Safe for touchless car washes
SnapPlate
SnapPlate+
Designed for grille safety
Designed for maximum strength
Breakaway rotating latches for grille safety
Stainless steel reinforced latches for maximum strength
Low-profile, breakaway plate mount
High-strength plate mount
Lightweight base
Stainless-steel reinforced base
Remove for all car washes
Safe for touchless car washes

The best (and fastest)
front license plate mount
Period.

Clean & minimal aesthetic, safety-first repairable design, and 3D-printed Made-in-USA recycled plastic for reduced environmental impact and better grille safety.

Clean, Minimal Aesthetic

SnapPlate+ blends seamlessly with the front end of your vehicle and leaves nothing behind when removed.

  • No screws, drills, or adhesive
  • Installs & removes in seconds
  • Includes optional anti-theft security screw
SnapPlate has breakaway features vs SnapPlate plus with hardened features

Strength-Optimized
or Safety-Optimized Designs

Choose SnapPlate+ for hardened features for maximum strength or SnapPlate for breakaway features that add extra vehicle safety in case of touch car washes, parking accidents, and minor mishaps (SnapPlate is available for the 2017-Jan 2024 Model 3 only).

SnapPlate+ is an all-new design optimized for strength:

  • Base with added side ribs and additional stainless steel reinforcement
  • Thicker plate mount with longer stainless steel fasteners
  • Larger-diameter, adjustable-fit, rotating latches with multiple contact points distribute stress on the grille

SnapPlate is our original design with features optimized for grille safety:

  • Base with breakaway rotating latches
  • Optional breakaway joints are available separately for plate mounts
  • Lighter construction designed to sacrifice itself in touch car washes and minor parking accidents
snapplate plus for the Tesla Model 3 is made from recycled plastic with stainless steel reinforcement

Proudly Plastic
& Stainless Steel

SnapPlates are 3D Printed with Made in USA Recycled PETG Plastic with Strategically-Placed Stainless Steel Fasteners.

  • Better grille safety compared to metal
  • Minimal waste compared to CNC routing
  • Less plastic use compared to injection molding

SnapPlate+ Tesla Model 3 Features

Secure, lockable design that installs in seconds with no screws, drills, or adhesives.

SnapPlate & SnapPlate+

Clean & minimal aesthetic, safety-optimized or strength-optimized designs, and 3D-printed Made-in-USA recycled plastic for reduced environmental impact and better grille safety.

The best (and fastest) front license plate mount. Period.

Quick & easy installation
no tools required

Say goodbye to screws and adhesives – SnapPlates are designed for quick and easy installation, with no tools required.

  • No screws or adhesives
  • Installs and removes in seconds
  • Blends with the front end when installed
  • Leaves nothing behind when removed
  • Includes optional anti-theft security screw
Instruction Guide

  • SnapPlate kits include

    • One fully-assembled front license plate mount, ready for your license plate
    • Four black and four silver torx security screws for the plate
    • One black torx security screw to optionally secure it to the car
    • One combo T10/T25 torx security screwdriver to keep in the car
    • One zippered felt case to keep all the accessories tidy in your car

  • SnapPlate+ is perfect to

    • Remove your plate for car shows
    • Install to avoid tickets while parked at a meter
    • Remove to clean your car at home or at a car wash
    • Install for toll-by-plate roads and bridges
    • Deter theft with torx security screws on the plate and mount
    • Install a temporary plate to support your favorite team on game day

Customer Reviews

Based on 46 reviews
89%
(41)
4%
(2)
0%
(0)
2%
(1)
4%
(2)
100.0
D
Daniel J. Ocegueda
Perfect Fit and Easy Install for 2024 Tesla Model 3 Performance

This aftermarket front license plate holder was incredibly easy to install on my 2024 Tesla Model 3 Performance. The adjustable height settings are a great feature, allowing for a perfect fit. Highly recommended!

K
Kyle Wildenauer
Words cannot describe it

I recently am transitioning from my Mustang GT to a new Model 3 Performance and like everyone else, I did not want any holes in my bumper. I used to order a lot from Sto-N-Sho but they didn't make anything for the 2024+ Model 3. After a bunch of research I came across Snapplate and everyone gave them high praise/reviews. I emailed them an inquiry and were quick to respond. Very professional and knowledgeable since this is my first EV. Within minutes after a short email back and forth, I placed an order. Honestly I was kind of shocked to find out it was 3D printed which makes it that much more awesome (how often do you really see these type of license plate holders on the market? Haha). I take delivery of my car on 9/26 so haven't been able to use it yet but would be happy to do a follow up review.

J
Jason McPartland
SnapPlate is the ONLY plate holder!

Such a great product, I had it for my 2020 Model 3 and now have one for the 2024.

High quality and the best accessory for your Tesla!

s
spyrish
Review

I am finally leaving my review after almost 4 years of use. I got my
snap plate holder about Oct in 2019. After looking around, I
settled on this product. I just passed 137,000 miles and the snap
plate design was holding up very nicely.

I know that there have been updates in the design which helped
strengthen the plate holder to the base mount. My first top plate
holder had an issue from wind after 52,000 miles, and it was replaced
with the second updated plate holder (V2) same original base mount.
That one (V2 plate holder) was awesome, no issues until I broke it
myself on accident at about 82,000 miles. I got a replacement for the
plate holder (V3), as the base was still going strong.

I had no issues with the original base mount or V3 plate holder until
being hit with a toll lane barrier stick after someone ran over it on
the 91 express lanes. No damage to my Tesla M3, but I did lose the
snap plate and my front plate at about 108,000 miles.

I originally got this plate thinking I would remove it from time to
time, but never did. It looked good and I had no issues with it
staying on while driving and it has been very solid.

I highly recommend the plate holder! The original Base is still going strong at 137,000 miles and is still solid and secure as the day I purchased it. The V2
and V3 plate holders are also very secure and did their job. I am
purchasing another after I leave this review.

I just had something hit the plate holder as I was driving today and again, it worked as designed. The mount that attaches to the base and plate holder took the hit, broke but held in place until I got home. So I just need to replace that 2 dollar part and it's as good as new.

Again, very solid product that can be removed as needed. I highly recommend it!

R
Roberto F
Review

Great product and to be honest its design is the best. I find it very easy to remove whenever is shower time and bat wings look great on it.

123

  • Innovative Accessories

    Designed to solve everyday problems

  • Sustainably Sourced

    Made from recycled plastics

  • Responsibly Made

    Designed, 3D printed, and assembled in California

Save on Purchases or Earn Commissions with EveryAmp

Find coupons or sign up as an affiliate

Opportunities to Save and Earn
Back to top