img
  • SnapPlate plus front license plate mount kits for the 2017 to 2023 Tesla Model 3 include a hardware kit with four black and four silver T25 torx security screws and a combo T25 and T10 screwdriver
  • SnapPlate+ 2024+ Tesla Model 3 Main
  • SnapPlate plus front license plate mounts for the 2024 and up Tesla Model 3 feature a simple pushbutton design with adjustable plate height, grille depth adjustment, and an optional anti-theft security screw
  • SnapPlate+ 2024+ Tesla Model 3 Heights
  • SnapPlate+ 2024+ Tesla Model 3 Aesthetic
  • SnapPlate plus for the 2024 and up Tesla Model 3 is made from 3D printed recycled plastic with stainless steel fasteners because it's safer, stronger, and less wasteful than other methods
  • SnapPlate+ 2024+ Tesla Model 3 Lockable Design
  • SnapPlate plus front license plate mounts for the 2017 to 2023 Tesla Model 3 feature a simple pushbutton design with adjustable plate height and grille fit and an optional security screw
  • SnapPlate plus front license plate holders for the 2017 to 2023 Tesla Model 3 features adjustable plate height with high, center, and low positions
  • SnapPlate plus front license plate holders for the 2017 to 2023 Tesla Model 3 have a clean, minimal aesthetic
  • SnapPlate Plus for the 2017 to 2023 Tesla Model 3 is made from recycled plastic with stainless steel reinforcement
  • SnapPlate plus front license plate holders for the 2017 to 2023 Tesla Model 3 have a strength optimized design with stainless steel reinforcement
  • SnapPlate front license plate mount kits for the 2017 to 2023 Tesla Model 3 include a hardware kit with four black and four silver T25 torx security screws and a T25 screwdriver
  • SnapPlate front license plate mounts for the 2017 to 2023 Tesla Model 3 feature a simple pushbutton design with adjustable plate height, breakaway features, and an optional security screw
  • SnapPlate front license plate holders for the 2017 to 2023 Tesla Model 3 features adjustable plate height with high, center, and low positions
  • SnapPlate front license plate holders for the 2017 to 2023 Tesla Model 3 has a clean, minimal aesthetic
  • SnapPlate for the 2017 to 2023 Tesla Model 3 is made from 3D printed recycled plastic with stainless steel fasteners because it is safer, stronger, and less wasteful than other methods
  • SnapPlate front license plate holders for the 2017 to 2023 Tesla Model 3 have a safety optimized, repairable design
1 16

Tesla Model 3 SnapPlate Front License Plate Holder

Tesla Model 3 SnapPlate Front License Plate Holder

$130.00
$130.00
Sale Sold out
Year Range
SnapPlate Version
Key Features
  • Clean, minimal design blends perfectly with the Tesla Model 3 front end
  • Mount installs and completely removes in seconds (remove for touch car washes!)
  • Height-adjustable plate mount with high, center, and low positions
  • 3D printed from Made-in-USA recycled PETG plastic
Compatibility
  • Tesla Model 3 (fits all trims, choose your year)
  • US, Canada, and Mexico license plates
Includes
  • Five black and four silver T25 torx security screws, screwdriver, and felt case
  • Security screw and driver to prevent removal and deter theft
Installation
Shipping calculated at checkout.
View full details

Customer Reviews

Based on 44 reviews
89%
(39)
5%
(2)
0%
(0)
2%
(1)
5%
(2)
100.0
J
Jason McPartland
SnapPlate is the ONLY plate holder!

Such a great product, I had it for my 2020 Model 3 and now have one for the 2024.

High quality and the best accessory for your Tesla!

s
spyrish
Review

I am finally leaving my review after almost 4 years of use. I got my
snap plate holder about Oct in 2019. After looking around, I
settled on this product. I just passed 137,000 miles and the snap
plate design was holding up very nicely.

I know that there have been updates in the design which helped
strengthen the plate holder to the base mount. My first top plate
holder had an issue from wind after 52,000 miles, and it was replaced
with the second updated plate holder (V2) same original base mount.
That one (V2 plate holder) was awesome, no issues until I broke it
myself on accident at about 82,000 miles. I got a replacement for the
plate holder (V3), as the base was still going strong.

I had no issues with the original base mount or V3 plate holder until
being hit with a toll lane barrier stick after someone ran over it on
the 91 express lanes. No damage to my Tesla M3, but I did lose the
snap plate and my front plate at about 108,000 miles.

I originally got this plate thinking I would remove it from time to
time, but never did. It looked good and I had no issues with it
staying on while driving and it has been very solid.

I highly recommend the plate holder! The original Base is still going strong at 137,000 miles and is still solid and secure as the day I purchased it. The V2
and V3 plate holders are also very secure and did their job. I am
purchasing another after I leave this review.

I just had something hit the plate holder as I was driving today and again, it worked as designed. The mount that attaches to the base and plate holder took the hit, broke but held in place until I got home. So I just need to replace that 2 dollar part and it's as good as new.

Again, very solid product that can be removed as needed. I highly recommend it!

R
Roberto F
Review

Great product and to be honest its design is the best. I find it very easy to remove whenever is shower time and bat wings look great on it.

E
El T
Review

What a nifty product. A genius design fitting to the minimalist look of the Tesla design. And EZEEE to install. Just like the video shows! Great job!

L
Lenora Trask
Review

What a nifty product. A genius design fitting to the minimalist look of the Tesla design. And EZEEE to install. Just like the video shows! Great job!

Thank you!

123

SnapPlate & SnapPlate+

Clean & minimal aesthetic, safety-optimized or strength-optimized designs, and 3D-printed Made-in-USA recycled plastic for reduced environmental impact and better grille safety.

The best (and fastest) front license plate mount. Period.

Clean, Minimal Aesthetic

SnapPlate blends seamlessly with the front end of your vehicle and leaves nothing behind when removed.

  • No screws, drills, or adhesive
  • Installs & removes in seconds
  • Includes optional anti-theft security screw

Strength-Optimized or Safety-Optimized Designs

Choose SnapPlate+ for hardened features for maximum strength or SnapPlate for breakaway features that add extra vehicle safety in case of touch car washes, parking accidents, and minor mishaps (SnapPlate is available for the 2017-Jan 2024 Model 3 only).

    SnapPlate+ is an all-new design optimized for strength
  • Base with added side ribs and additional stainless steel reinforcement
  • Thicker plate mount with longer stainless steel fasteners
  • Larger-diameter, adjustable-fit, rotating latches with multiple contact points distribute stress on the grille
    SnapPlate is our original design with features optimized for grille safety
  • Base with breakaway rotating latches
  • Optional breakaway joints are available separately for plate mounts
  • Lighter construction designed to sacrifice itself in touch car washes and minor parking accidents

Proudly Plastic & Stainless Steel

SnapPlates are 3D Printed with Made in USA Recycled PETG Plastic with Strategically-Placed Stainless Steel Fasteners.

  • Better grille safety compared to metal
  • Minimal waste compared to CNC routing
  • Less plastic use compared to injection molding

How SnapPlate Works

Say goodbye to screws and adhesives – SnapPlates are designed for quick and easy installation, with no tools required.

  • No screws or adhesives
  • Installs and removes in seconds
  • Blends with the front end when installed
  • Leaves nothing behind when removed
  • Includes optional anti-theft security screw
Instruction Guide
Selected Image

The SnapPlate Story

The idea for SnapPlate was born when one of our co-founders got a ticket for not having a front license plate the same weekend he bought a new 3D printer. As a self-proclaimed front-license-plate hater, he wanted something that was easy to install when traveling to areas that enforce front license plate use and easy to remove the rest of the time. None of the options available had every feature we wanted, so we made one…and then all our Tesla friends wanted one too.

SnapPlate front license plate mounts install and completely remove in seconds. The clean, minimal design blends perfectly with the Tesla front end when it’s installed and leaves no unsightly hardware behind when it’s removed. The plate mount is height adjustable with high, center, and low mounting positions to suit your taste.

SnapPlates are designed, printed, and assembled in California by Tesla owners and fans. We strive to reduce our environmental impact by using recycled plastics that are Made in the USA and by using Prusa 3D printers to make strong parts with internal structures that optimize our use of plastics.

SnapPlate kits include:

  • One fully-assembled front license plate mount, ready for your license plate
  • Four black and four silver torx security screws for the plate
  • One black torx security screw to optionally secure it to the car
  • One combo T10/T25 torx security screwdriver to keep in the car
  • One zippered felt case to keep all the accessories tidy in your car

SnapPlate+ is perfect to:

  • Remove your plate for car shows
  • Install to avoid tickets while parked at a meter
  • Remove to clean your car at home or at a car wash
  • Install for toll-by-plate roads and bridges
  • Deter theft with torx security screws on the plate and mount
  • Install a temporary plate to support your favorite team on game day

Save on Purchases or Earn Commissions with EveryAmp!

Find coupons or sign up as affiliate at:

Opportunities to Save and Earn